Skip navigation


Rentmeister Total Home Service Blog

Heating Repair Issues to Look for This Spring

Here in Salt Lake City, heating repair services usually get a final burst of activity in the early spring. Temperatures are rising and people no longer need to run their heating systems every day, which means that you can afford to keep yours out of commission long enough to conduct repairs. In addition, there may be lingering problems with your heater that have gotten worse over the winter, and now that summer is coming you want to get them dealt with before they get any worse.

Here are some heating repair issues to look for this spring.

Your monthly energy bill will give you a good first hint. If you noticed you were paying more for your heating this winter, despite the fact that rates had not gone up and you weren’t using it any more than you normally would, then chances are there’s something wrong with the system. General wear and tear can led to reduced efficiency as well as more serious repair issues, and while it’s certainly a problem, it does allow the heater to function despite charging you more for the privilege. Now is the perfect time to get that dealt with.

You might also look for a gradual decline in either the heat levels or the air flow from your furnace over the course of the winter. Both problems can stem from clogged lines, while low air flow may also be caused by a faulty fan motor or similar blower component. Reduced heat might be caused by a problem in the gas line or by clogged or malfunctioning burners which won’t be able to light the gas up the way they should. Again, it’s something that you might not be able to deal with when you need the heater on a daily basis, but rising temperatures gives you a chance to make some changes there as well.

For other heating repair issues to look for this spring, or to schedule a maintenance session to clean your heater up and look for such problems, give the experts at Rentmeister Total Home service a call. Heating repair service in salt Lake City is our specialty and we’re dedicated to correcting the problem right the first time, every time!

Comments are closed.